Features of use of the Salute 100 motor-block, technical characteristics of the device

Motoblock - an indispensable unit for a small farm and for the dacha. The scope of application of this technology is very extensive, especially since the production of units does not stand still, releasing newer and improved models. In this article we will talk about the Salute 100 motoblock.

"Salute 100": device description

The Russian plant of OAO GMZ Agat in the Yaroslavl region, where the Salyut tillers are manufactured, began production of these units back in 2002. "Salute 100" is a unit with multiple uses. The list of works performed by the wonder-technology allows using the tiller as a snowplow, for harrowing, and much more.

The Salyut 100 motorblock has a gasoline engine, it is also expected to produce a diesel engine, which ensures longer operation. This mechanism works in the drive and trailer condition. The cart of the motor-block thanks to it can move with a speed up to 8 km / h.

The Salyut 100 motoblock is probably the best Salyut model today: it has a small weight and size, it is easy to control, the model has greater efficiency and reliability in operation, maintenance and transportation of the unit are not difficult.

Did you know? The beginning of the production of the first motoblocks in the USSR was at the end of the seventies of the last century. Two pioneers of Perm Aviation Plant and the Leningrad plant "Red October" almost simultaneously started production.

Specifications "Salut 100": features of the model

The characteristics of the tiller are impressive:

  • Engine of salute motoblock: Lifan 168F-2B, OHV; horizontal shaft; 196 cm3.
  • Transmission: belt grip; gearbox gear; 4 forward gears, 2 rear, there is the possibility of changing the drive pulley; power takeoff with pulley.
  • Average speed: 2.8-7.8 km / h.
  • Power of the Salyut motor-block (max.): 4.8 kW (6.5 hp) at a speed of 3,600 per minute.
  • Fuel tank capacity: 3.6 liters.
  • Capacity crankcase for oil: 0.6 l.
  • Transport track: 360/650 mm.
  • Diameter of mills: 320 mm.
  • Width of processing (at cultivation): 300/600/980 mm; depth - up to 250 mm

Fully equipped motorbike "Salute 100"

The complete set of equipment for the motoblock includes: six pieces of separate cutters for soil, disks protecting vegetation; mobile milling guards; two wheels and bushings to the axles; opener; bracket for suspension components; oil dipstick; instruments.

The following equipment can be connected to this modification of the tiller: rotary and finger mowers, snow thrower, broom-brush, shovel.

On the motor-cultivator "Salute", special knives-shaped cutters are installed; for easier entry into the ground, the knives are made in the shape of a sickle, made of reliable spring steel. The package includes three pairs of bolt cutters that connect steel fingers.

Important! Under the transmission of torque to the towing equipment, the belt is installed on the clutch driven pulley.

What can walking tractor in your garden

The most varied work with the Salyut walk-up can be done:

  • the unit cultivates the ground effortlessly, plows, forms furrows, loosens and harrows the ground;
  • walking tractor mows grass on lawns, cleans garden paths;
  • with it you can spud plantings and dig up tubers and roots;
  • walk-behind tractor is able to pump water and carry any cargo;
  • a snow blower for the Salut motoblock is provided for winter.
Motoblock suitable for work in the garden, in the garden, in the greenhouse and even in mountainous areas. Shod mills of the motor-block allow to work on all types of soil, including on a virgin soil. Comfortable adjustable in height and on the sides of the steering wheel makes it possible not to follow the unit on arable land. Salyut is also regulated to the desired width and depth when working the land. In addition to all of the above, walking tractor can be used as a power source.

Interesting! Production in the USSR of motor-blocks was limited not only by Russia. In Armenia (Yerevan), tires were manufactured for the units, in Georgian Kutaisi under Italian licenses they were assembled motor assemblies assembled, in Ukraine the plant that mastered the production of motor-blocks and which operates to this day is unique - Advis plant in Khmelnitsky.

How to use the motorbike "Salute 100"

Before starting work on the Salut tiller, you should check if the cutters are installed correctly: you can check the instructions. The installation of the coulter will greatly facilitate the work, the unit will not dig deep into the soil, and you will not make much effort.

Attention! Without a coulter, the walker will jerk and jump in hands, often burrowing into the ground. You will have to constantly switch to reverse gear to emerge from the ground.
If you want to plow the virgin lands with the Salyut motor-block, do it in several stages. Stage one - at minimum speed, remove the crust from the upper layer, along with it the turf will go. In the second approach in first gear, at medium speed, slightly deepen to lift lumps on the surface. And for the third time by deep plowing, loosen the ground thoroughly.

When plowing the soil in several approaches, change direction. It is better and easier to work on dry land. If you have passed the first time, lifting a wet layer, then do not rush - let it dry. Another tip: always check the oil level, fill the unit with high-quality gasoline, and there will be no problems with the equipment.

Advantages and disadvantages of the Salute 100 motor-block

The advantages of the Salut tiller are in its small size, it makes it easy to maintain and manage. Also to the advantages include gear reducer, which allows you to easily adjust the speed and transmission and belt drive clutch. By the way, about the belts: judging by the reviews, the native belts on the motoblock do not withstand long-term operation, and it is worth replacing them with more reliable ones. The advantages include the steering gear and transmission. Now, to manage them, do not have to bend over and make efforts.

This model is considered the best tiller "Salut" for the upgraded modification of the steering handles. They are made to be streamlined and ergonomic, which smooths the vibration when working. The same applies to the clutch levers: before it was made of metal and could pinch the hand when switching, now it is made of plastic, does not pull up and does not require force. The tiller has reliable and well thought-out hitch, evenly distributing the weight and effort in working with the attachments.

The disadvantages include only low-quality belts and a small angle of the lifting arms.

This article takes into account almost all the facts about the Salut motoblock, it remains only to summarize: undoubtedly, a similar unit is needed in the garden, as it greatly facilitates the work in the garden and in the garden. Making a minimum of effort, you can do a lot of work with the help of a walk-behind tractor and not only during the summer season.

Watch the video: See What Happens When A Plane Violates Presidential Airspace. TODAY (November 2024).